Видео

I bought it from Amazon, it is a VIVO 25U open frame rack! Very similar in build to the Startech open frame just a bit cheaper.

Agreed, yes my setup is definitely limited. When I do have to service the machine, I usually just pop the top off and get to it from above. Open frame rack perks I suppose! In the future I would love doing the cable arm approach, as others have suggested!

Two explanations! 1. I am using a voice isolator on my voice that helps reduce background noise. 2. 13th gen Dell servers are actually not so bad. Theres a few ways to tame them down, using ipmi-tool and setting manual fan curves is definitely an option. But out of the box they are definitely a bit above comfortable if you’re in the same room for more than a few minutes.

CyberPower OR500LCDRM1U I really like them, very nice form factor. They make them in all sorts of capacities, this one was 500VA, around 350watts.

Thanks!! They are high density BTF Lighting 840 per meter LED strips. I love them. You can get them on Amazon in different styles but these are the 24 volt RGB version. I use them with a Zigbee controller in Home Assistant but you can just buy the kit with a standard remote controller. a.co/d/3QV86NC

@@pealock Very cool. My rack is in a spare apartment above the garage, so I don't ever see or hear it, but I still think I have to get those because it looks so badass. Nice setup and thanks for sharing.

Thank you for the kind words! The drawer is a Navepoint 2U Sliding Drawer with Lock. It is 13” Deep internally. Not exactly sure of the exact SKU but here is a link (non affiliate) to the Amazon listing which is where I purchased mine! a.co/d/11ttrdN

I wish I could do more content around it, sadly we sold it about a year ago after we moved! Heres what I can tell you: 160 square feet (8’x20’) Full plumbing and electrical, exact same connections as found on most common RVs Fully towable and street legal with all clearances We bought it prebuilt from a trailer company, it was a one-off demo unit My wife and I lived in it full time for about two years, then kept it as a home office in our backyard after purchasing a home

Thanks for the info! I agree the chassis needs fixed. Looking to swap to a Sliger case soon but ill patch those up in the meantime.

That is correct, 10 gigabit connection using SFP+ LC fiber transceivers and OM4 fiber patch cables! Works great. DAC cables are another great choice and more cost effective but I prefer the look and flexibility of fiber cabling.

Vivo 25U Open Frame from Amazon. It is similar to the Startech 25U but a bit cheaper. VIVO 25U Freestanding Open Frame... www.amazon.com/dp/B0BFJKX5XB?ref=ppx_pop_mob_ap_share

Right around 200 watts at idle with the current config! I got the Dell drives (1.2TB 10K RPM) off of eBay for 30 dollars a piece. Ive been quite happy with the setup. Reads are around 600mbs and writes are in the 450mbs range.

@@pealock thank you for the info

Absolutely thanks for the suggestion! Thankfully I can service both of them without fully sliding them out but yes if I have to remove them fully I will unvelcro/ revelcro.

Here ya go! They are Middle Atlantic Horizontal Lacing bars. They make different styles, some are offset which can be really nice. This link is to a 10-pack, im not sure they sell them in this style individually but you can always check out ebay. www.markertek.com/product/lbp-1r/middle-atlantic-round-lace-bar-10-pieces?gad_source=1&gclid=CjwKCAjwnv-vBhBdEiwABCYQAyApW3dFFh5vyT9PlZmsg585URkLmgIx3U_YcqTaqOjeB5kh8-phuBoC0t8QAvD_BwE

@@pealock awesome thanks!

Same question! I just bought a little network rack to begin and I'd love to be able to move my gaming PC to a rack.

Thank you!! The case is a Rosewill L4500U. Its fairly large, tons of room for components. I use an EKWB 360mm AIO liquid cooler for the CPU. Temps are pretty good for a rack system which typically run a little bit warmer. For what its worth, if I were looking to build/buy something new I would get a Sliger rack case. They have some really awesome cases and more flexible and modern layouts. But the Rosewill is a beast don’t get me wrong! You just have to have a really deep rack cabinet to accommodate it.

Thanks, Andrew!

Definitely in the queue!! I think next video will be a walkthrough of my main 25U rack at my office. But yes would love to do an HA video.

Yeah! That's a great point. The line for the dish was bundled into a group of four lines labeled Office 1, 2, 3, and 4. I just sequenced those into the patch panel but you are correct it isn't standardized at all. I will consider that for future jobs, thank you for that suggestion. Standards are key for replication and scaling.

I will keep that in mind! I usually work alongside electricians so doing a proper grounding setup wouldn’t be hard at all. Thanks for the tip!!

Thanks! That is a Birddog NDI to SDI converter for taking a network video source and converting it into a physical video output. We route that into the video switcher (ATEM Mini Pro) and have it on a multi view.

@@pealock Ah, that's a surprisingly aesthetic piece of tech for the purpose! Cheers for the explanation.

Surprisingly not too bad. Most of the fans are 80mm or 120mm Noctua. But yeah the static noise floor is higher than I would like. But it’s not screeching loud by any means.

thought the exact same thing

I think by default mine came with either 4 or 8gb of RAM but I just upgraded it myself. Make sure you use low profile DDR3, otherwise it may not fit quite right in the small case.

The i7 4770 is good enough for 1080p at 30FPS. I wouldn't try to push it beyond that. If you can find a used Nvidia 1050ti, it will allow you to do multiple 1080p 60FPS streams using NVENC. That is the best solution for this small of a computer.

@@pealock thanks I really appreciate your answer, I'll try to get one the thing is that I'm in Mexico and here a regular 1050 is around 300-320 dollars fml, anyway, thanks again and have a great day

I would try to find a newer processor at this point, but the 4770 would definitely get the job done.

Here is a great setup from another RUclips channel. I think it would play PUBG at 1080p very well. ruclips.net/video/DMr02rLyTpk/видео.html

Dude thank you!! Your videos were a huge inspiration to me! Thanks for all of your hard work putting those together.

It is under the "Feedback" section of the actions menu. Basically you want to set it up to where when the particular input number is in preview/program, it changes the button background color to green/red

Hey thanks for the kind words! One suggestion I would definitely make is to set your subnet to something random and rarely used. One issue I ran into early on was having my devices on a similar subnet as the venues connection, and my devices defaulted to DHCP from their router and bypassed mine. Not sure if it is just a quirk of Ubiquitis ecosystem but as a fix I have my devices on 10.1.10.x-100. Haven't had any problems since doing that! What all are you looking at getting for your setup??

@@pealock Nice will keep that in mind. Not sure how flexible the Mikrotik router will be, but apparently very customisable so hopefully I can sort a subnet out. I have a 6U case with a Dual 9.7inch screen. Mini computer, router, ATEM and Hyperdeck inside. As well as a chinese versions of a Webcaster and a BM H.264/recorder which I hope to add into the system. Still waiting on parts to arive, but my goal is to get it all working without the need for a second monitor (can do all the switching on the dual display) - just carry the one 6U case around with me and I am set to go.